Skip to main content

Supplying wireless calling systems in South Africa since 2012

BellMe

Products

Product specifications

The products in BellMe's Catalogue, with model numbers, capacity, battery, waterproofing and transmission range. ALL units operate on 433 MHz radio frequency.

Call buttons, cancel buttons and wall units

BellMe transmitter specifications: warranty, waterproofing, mounting, battery and distance
ModelUnitWarrantyWaterproofingMountingBatteryDistance
B-A1-WLSingle key call buttonA 60 × 60 mm call button with a soft, indented press surface and a unique programmable code.5 years100% waterproofWearable on a lanyard or mountable1 × A23100–150 m depending on the surroundings
B-A1-BCSingle key cancel buttonClears one call or can be configured as a shared cancel button for some solutions.5 years100% waterproofMounted1 × A23100–150 m depending on the surroundings
B-SW2Call and cancel wall unitAn 85 × 85 × 15 mm wall unit with a large call button and integrated illuminated cancel button.2 yearsWaterproofMounted1 × A23100–150 m depending on the surroundings
B-SW-G33Call and cancel wall unit with cordIncludes a 60 cm coiled cord that extends to 1.5 m for a bedside call point within easy reach.2 yearsWaterproofMounted1 × A23100–150 m depending on the surroundings
B-A33-key call buttonCall, Bill and Cancel in one device, designed primarily for waiter calling. A mounting bracket is supplied with every button.2 years100% waterproofMounted1 × A23100–150 m depending on the surroundings

Receivers

BellMe receiver specifications: capacity, warranty, best use and limitations
ModelReceiverCapacityWarrantyLimitations
B-99GDisplay panelWall-mounted panel for a nurses' station, with a rolling display, adjustable volume and six ringtone options.Up to 256 buttons. These can be a combination of call and cancel buttons, or just call buttons.2 yearsShows short numerical or letter-and-number call codes. 3 digits only, where the 1st digit can be an alphabet letter between "A" - "F"
B-901Large display panelLarge display for multiple wards or areas, showing up to 16 characters and connecting to W900 software through a smart gateway.Unlimited buttons when configured through W900 software.2 yearsRequires the display, smart gateway, router, internet connection and a PC running the software, linked by LAN cables.
B-650Wristwatch receiverWorn on the wrist or a lanyard, it gives an audible and vibrating alert and displays the calling code.Up to 200 buttons.1 yearThe alert is not loud enough to wake a caregiver while sleeping.
B-700LED light receiverA receiver that flashes bright red and can beep continuously until the call is cleared.Up to 99 buttons, including at least one cancel button2 yearsRequires constant 12 V power and a cancel button; it does not show a calling code, it only flashes and makes an alert noise.
B-Q4Signal repeaterRepeats calls wirelessly between buttons and receivers, extending the distance between calling points and receivers on large properties.Unlimited buttons per repeater1 yearExtends range only — it does not display which button was pressed. Supplied with a 1 m 9V1A power lead; placement and quantity must be confirmed by a site inspection and test.

System requirements

  • Frequency: 433 MHz radio frequency.
  • Power: Display panels and LED lights need a 12 V supply with a 2-pin plug; the B-Q4 signal repeater is supplied with a 9V1A supply. We recommend dedicated ceiling plug points and a UPS.
  • Signal repeater: the B-Q4 extends coverage where the signal falls short. Its position and the number required must be confirmed on site.
  • Reporting software: W900 desktop software works with the smart gateway, a router and LAN-connected computer.

More about the reporting software · Software and downloads

Need a configuration quoted?

Send us the number of call points and the receivers you want, and we will quote the exact list.